Wired Glass Replacement
Replace old Georgian wired glass with modern fire glass.
Learn more →We provide fire door vision panels in Pontypridd and across Mid Glamorgan, working from the classification your building needs and handing over the evidence that proves what was fitted.
Tell us what you need. We reply with next steps and a guide price.
We replace broken, missing and non-compliant vision panels, upgrade old wired glass, and correct beads and seals that have been fitted wrongly. Where a new vision panel is needed, we only cut it in where the door manufacturer or certification scheme allows it.
Coverage around Pontypridd includes the CF37 districts and nearby Tonypandy, Caerphilly, Rhondda. Pontypridd is about 10 km from Rhondda, the largest town in our Mid Glamorgan coverage.
Ordinary float or toughened glass in a fire door vision panel is a serious defect. We replace it with fire-resistant glass compatible with the door.
Missing or wrong glazing seals and loose beads are among the most frequent defects found in fire door inspections. They are quick to fix properly once the door's specification is known.
A new aperture can invalidate a door's certification unless the manufacturer's instructions allow it. We check before cutting.
Building regulations are devolved in Wales, so fire safety design follows the Welsh Ministers' version of Approved Document B rather than the English one, alongside impact safety guidance for glazing.
The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, so the responsible person must maintain fire-resisting glazing as part of the premises' fire safety measures. The Fire Safety Act 2021 confirmed this extends to the structure, external walls and flat entrance doors of multi-occupied residential buildings.
Wales is introducing its own building safety regime for occupied residential buildings, so check current Welsh requirements before planning major works to blocks of flats.
After survey you get a fixed written quote for the agreed scope, so Pontypridd budgets are not open-ended.
We can phase work in Pontypridd around residents, staff or pupils, with out-of-hours options.
Designs follow the building and fire safety rules that apply in Wales, not a one-size-fits-all approach.
We can survey and quote for public buildings, blocks of flats and other building types in Pontypridd.
Yes. The replacement must be fire-resistant glass of a type the door's evidence allows, fitted with the correct beads and seals.
Once we know the door type and glass size, standard integrity panes can often be supplied quickly; insulating glass may take longer to cut to size.
Yes. We survey and install in Pontypridd and across Mid Glamorgan, including the CF37 district and nearby Tonypandy.
Yes. We plan phasing, out-of-hours work and temporary protection so the building can stay in use where the fire strategy allows.
Replace old Georgian wired glass with modern fire glass.
Learn more →Cracked or broken fire glass replaced to the original specification.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →Send drawings, a fire risk assessment action or photos of the glass marks.
We visit Pontypridd to measure, record existing marks and check the frames and substrate.
Your quote lists each item with its classification and the evidence it relies on.
We install, photograph seals and fixings before closing up, and hand over the schedule.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.