Wired Glass Replacement
Replace old Georgian wired glass with modern fire glass.
Learn more →When a fire strategy, inspection report or building control comment in Stroud calls for glazing tested to resist fire, our fire door vision panels service covers survey, supply and installation.
Tell us what you need. We reply with next steps and a guide price.
A fire door vision panel is the glazed opening in a fire door that lets people see through it. It is part of the door's fire rating: the glass, beads, glazing seals and the size and position of the opening all have to match the door's test or certification evidence.
After survey you get a fixed written quote for the agreed scope, so Stroud budgets are not open-ended.
Designs follow the building and fire safety rules that apply in England, not a one-size-fits-all approach.
We can phase work in Stroud around residents, staff or pupils, with out-of-hours options.
If your fire door inspection report lists vision panel defects, send it to us and we will quote item by item.
A new aperture can invalidate a door's certification unless the manufacturer's instructions allow it. We check before cutting.
Ordinary float or toughened glass in a fire door vision panel is a serious defect. We replace it with fire-resistant glass compatible with the door.
We cover Stroud and the surrounding postcode districts, including GL5, GL6. Nearby towns we also serve include Gloucester, Cirencester, Cheltenham. Gloucester, around 13 km from Stroud, is the largest town in the same coverage area.
Building work in England is covered by the Building Regulations 2010, with fire safety guidance in Approved Document B and impact safety guidance for glazing in Approved Document K.
Once a building is in use, the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to maintain fire safety measures, including fire-resisting glazing. The Fire Safety (England) Regulations 2022 add duties for multi-occupied residential buildings, including fire door checks in buildings over 11 metres.
Sector guides below cover care homes, industrial units and other buildings in Stroud.
Yes. The replacement must be fire-resistant glass of a type the door's evidence allows, fitted with the correct beads and seals.
It may provide integrity, but it often fails impact safety requirements. Replacement with modern fire glass is usually recommended.
Survey timing in Stroud depends on access, the size of the building and how urgent the defect is. Tell us your deadline when you enquire and we will confirm a date before you commit.
Yes. We survey and install in Stroud and across Gloucestershire, including the GL5 district and nearby Gloucester.
Replace old Georgian wired glass with modern fire glass.
Learn more →Cracked or broken fire glass replaced to the original specification.
Learn more →Doorsets with large glazed panels, tested as complete units.
Learn more →Putting right the defects found in surveys and fire risk assessments.
Learn more →Send the fire strategy extract, inspection report or a few photos of the openings.
We visit Stroud to measure, record existing marks and check the frames and substrate.
You receive a written quote naming the tested system and classification.
Work is completed to the manufacturer's details and documented for your records.
Send sizes, photos of any glass marks or your inspection report and we will come back with the right tested system.